TECHNOZON HOME · 06.11.2026
RockTek GX1 · Step-by-step installation
Check the exact model, Android version and firmware. A similar case or remote does not establish compatibility. The installer checks the device before making changes.
RockTek GX1
Supported by the installer. The tested remote has no Live TV key. Realtek image processing is unavailable to AI VISION; Blue opens native settings.
From preparation to first launch
- Open Settings → About on the box. Note the model and Android version and compare them with this page. Back up important personal files. A factory reset is not required.
- Connect a Windows 10/11 x64 PC and the box to the same home network. Avoid guest networks with client isolation. The PC needs internet access for licence verification.
- In About, repeatedly select the build number until developer mode is enabled. Return to Settings → Developer options and enable USB/ADB debugging. Labels vary by firmware.
- Open the active connection in Settings → Network and note the box IP address. Download the complete Windows installer from this site and wait for the download to finish. ADB and the required components are bundled.
- Launch the installer, select a language and read the terms. Choose Find box or enter the IP manually. If several addresses appear, match the address shown on the TV rather than guessing.
- On the TV, accept Allow debugging and select Always allow from this computer. A second request from Home local control may appear later; accept that request too.
- Select Install. The purchase is checked using the box identifier. For NEXON/TECHNOZON purchases use Purchase phone; for an already paid code use Activation code. A code is for one box. A network error does not mean the licence is missing.
- If Android blocks a component, note its name and the exact message. Do not ignore unknown warnings. If you temporarily changed Play Protect checks following support instructions, enable them again after installation.
- Keep power connected during copying and rebooting. If Wi-Fi disconnects, open Android Settings → Network, reconnect and check the new IP. Use the installer reconnect flow; do not factory-reset the box.
- If Home displays a Keep confirmation with a countdown, confirm it in time. Magisk profiles use a different flow: wait for the reboot and the installer completion message.
Check after installation
Press Home, open All apps, launch Google Play and a regular app. Check Wi-Fi, audio, remote actions below and voice search. Reboot once and repeat the checks. Keep the installer log and local data for recovery.
Remote: default actions
- Favorite → STESH; Settings → Android settings.
- Profile → recent apps. An existing custom assignment takes priority.
- Blue → native AiPQ / Dolby / peak brightness settings. Available controls depend on firmware; AISR access is not promised.
Future updates
Control → Updates: check available versions, read the changes and confirm installation. Update checking is not forced installation. Use the current Windows installer when a Ugoos system module change or migration from an old build is required. Android firmware updates are a separate manufacturer procedure; check Home and buttons afterwards.
Restoring the original Home
Connect the same box, select its address and choose Restore stock HOME. For Ugoos profiles use the same PC and Windows account containing the backup. Wait for completion and reboot, then check the home screen. Do not manually delete system packages or a foreign ATV module. If recovery cannot be confirmed, send a report to support rather than guessing.
If an error occurs: Log / Help → send diagnostics. Give support the report ID, model, installer version and failed stage. Do not post activation codes or personal data in a public chat.