TECHNOZON HOME

Install TECHNOZON Home on TOX1

Check the model and firmware

TOX1: Android 9, build 20201216. Build 20211207 is added as a diagnostic-based test profile; installation, reboot and remote operation require owner confirmation. Both builds retain the selected factory MboxLauncher or Launcher3.

Install from Windows

  1. Connect the box and a Windows 10 or 11 (x64) computer to the same local network. On the TOX1, enable ADB debugging in Developer options.
  2. Open the installer on the computer, select the IP address of the TOX1 and approve the debugging request on the TV. Check that the installer identifies the model as TOX1. It recognizes both stock launchers, MboxLauncher and Launcher3, and records the current default. If no default is set, follow the installer prompt and choose your preferred stock launcher as the default on the TV.
  3. Select Install and follow the instructions on screen. If Home asks you to confirm the new home screen, choose Keep. Press Home on the UR-02 remote and check that TECHNOZON Home opens.

Download the Windows installer

Restore the original home screen

Select the same box in the installer and choose the option to restore stock HOME. Press Home on the remote. The stock launcher you selected before installation should open.