Install Home on TOX3
Home 4.0.8 also recognizes UGOOS X4Q build 20240401.145042.
Before you start
Tested on TOX3, Android 11, build 20241108.153414 (32-bit). Use an installer with the TOX3 profile; Windows installer 3.0.5-r5 was tested. This is a separate test profile. Do not install Android 14 modules from TOX5 Lite or Ugoos. The UGOOS / TOX3 / X4Q variant on build 20241111.140057 requires installer 3.5.3 or later. The installer checks the original launcher for rollback before switching to Home.
- Check the model and build in Android Settings → About. Pair the UR‑02 over Bluetooth.
- Connect the PC and box to the same network and enable USB debugging on the box. In the installer select this box’s IP, choose Install and approve the debugging prompt on the TV.
- If Android asks for a Home app, select TECHNOZON Home first. Choose Always only for that app. Select Keep in the Home confirmation dialog.
- Press Home. Check red (power menu; dismiss with Back) and purple (STESH search).
UR‑02
Menu → panel; red → power; orange → recents; yellow → information; green → Android settings; blue → STESH; purple → STESH search.
Restore the colour buttons
If Home offers to restore remote buttons after a force stop, select Restore remote buttons.
After using Android’s Force stop, reopen Home. In Home go to Settings → Remote buttons → Enable / accessibility settings → TECHNOZON Home — Remote. Enable the service and go back. Look for “Key filtering active”.
If filtering is active, open “UR02 and additional remotes”, select the connected UR‑02 and check that TECHNOZON assignments are enabled. Original buttons mode passes the keys through.
Restore the original Home
In the installer select the same TOX3 and choose Restore stock HOME. Press Home to check the result. The tested box returned to Quickstep. No factory reset is needed.