TECHNOZON HOME · 06.11.2026
Ugoos SK4 · Step-by-step installation
Check the exact model, Android version and firmware. A similar case or remote does not establish compatibility. The installer checks the device before making changes.
Ugoos SK4
On Ugoos SK4 with Android 14, installation requires Magisk 26 or later and root access for ADB Shell. To restore ULauncher and the Play Store, use the same PC and Windows account. Setup checks STESH and AI VISION and updates them when necessary, keeping their data. Open Management → Updates. Home, STESH and AI VISION update on the box with Android confirmation. Use Windows Setup once to migrate from an older version. The Magisk system module is preserved; releases requiring module changes need Windows Setup. Settings and favorites are kept.
Root · Magisk
Before installing, enable root in firmware settings, install Magisk 26+ and grant superuser access to Shell (UID 2000). ADB authorization and root are separate permissions. If the request hangs or is denied, check Magisk → Superuser; never install a random boot.img from another model.
From preparation to first launch
- Open Settings → About on the box. Note the model and Android version and compare them with this page. Back up important personal files. A factory reset is not required.
- Connect a Windows 10/11 x64 PC and the box to the same home network. Avoid guest networks with client isolation. The PC needs internet access for licence verification.
- In About, repeatedly select the build number until developer mode is enabled. Return to Settings → Developer options and enable USB/ADB debugging. Labels vary by firmware.
- Open the active connection in Settings → Network and note the box IP address. Download the complete Windows installer from this site and wait for the download to finish. ADB and the required components are bundled.
- Launch the installer, select a language and read the terms. Choose Find box or enter the IP manually. If several addresses appear, match the address shown on the TV rather than guessing.
- On the TV, accept Allow debugging and select Always allow from this computer. A second request from Home local control may appear later; accept that request too.
- Select Install. The purchase is checked using the box identifier. For NEXON/TECHNOZON purchases use Purchase phone; for an already paid code use Activation code. A code is for one box. A network error does not mean the licence is missing.
- If Android blocks a component, note its name and the exact message. Do not ignore unknown warnings. If you temporarily changed Play Protect checks following support instructions, enable them again after installation.
- Keep power connected during copying and rebooting. If Wi-Fi disconnects, open Android Settings → Network, reconnect and check the new IP. Use the installer reconnect flow; do not factory-reset the box.
- If Home displays a Keep confirmation with a countdown, confirm it in time. Magisk profiles use a different flow: wait for the reboot and the installer completion message.
Check after installation
Press Home, open All apps, launch Google Play and a regular app. Check Wi-Fi, audio, remote actions below and voice search. Reboot once and repeat the checks. Keep the installer log and local data for recovery.
Remote: default actions
- Home opens the launcher. Use the arrows to navigate and OK to open.
UR02 remote: buttons and setup
Pair UR02 over Bluetooth in Android settings. In Home, open Settings → Remote buttons → UR02 and additional remotes, then select your UR02. Android may list your UR02 as UR02 Keyboard or UR02 Mouse. Home recognizes either name for this model and keeps your button assignments.
| Button / press | Opens |
|---|---|
| Menu · single press | TECHNOZON side panel |
| Menu · quick double press | Android settings |
| Menu · hold | On-screen information |
| Red | Power menu |
| Orange | Recent apps |
| Yellow | Show / hide information |
| Green | Open or close the AI VISION movie panel |
| Blue | STESH |
| Purple | STESH voice search |
These are the initial assignments. If you have already changed a button, Home keeps your choice.
Change a button action
- Select the button in your UR02 profile.
- Choose single press, double press or hold.
- Select an app or action. Repeat for other buttons. Assignments survive a reboot.
Restore original buttons
- For the whole remote: open its profile → “Restore original buttons for the whole remote”. Your assignments remain saved.
- To use Home assignments again, choose “Enable saved TECHNOZON assignments”.
- For one button: select it → “Restore original action”. This clears all three assignments for that button only.
Another remote or an unrecognized button
- Select the connected remote → “Add / learn button”.
- Press the required button within 30 seconds, then give it a name and an action.
- Firmware may intercept some buttons. Arrows, OK, Home, Back, power, volume and microphone cannot be reassigned in this menu.
Why a single press may pause briefly
With a double-press action assigned, Home waits briefly for a second press. If you assign only double press or hold and leave single press empty, a short press will not open anything.
Future updates
Control → Updates: check available versions, read the changes and confirm installation. Update checking is not forced installation. Use the current Windows installer when a Ugoos system module change or migration from an old build is required. Android firmware updates are a separate manufacturer procedure; check Home and buttons afterwards.
Restoring the original Home
Connect the same box, select its address and choose Restore stock HOME. For Ugoos profiles use the same PC and Windows account containing the backup. Wait for completion and reboot, then check the home screen. Do not manually delete system packages or a foreign ATV module. If recovery cannot be confirmed, send a report to support rather than guessing.
If an error occurs: Log / Help → send diagnostics. Give support the report ID, model, installer version and failed stage. Do not post activation codes or personal data in a public chat.