Companion 0.7.1-preview · Home 3.0.9 · Test feature
Companion instructions
KICKPI KP3. Screen sharing requires a hardware video encoder on the TV box. A decoder handles playback. On the tested KP3 firmware you can use the remote, STESH voice search, apps, monitoring, and file and APK transfer.
Your smartphone becomes a TECHNOZON Home remote. From first connection to files, voice and diagnostics.
Download for Android ↓TECHNOZON Support ↗Contents
- 01 · Before you begin
- 02 · First connection — step by step
- 03 · Remote and app launcher
- 04 · Full-screen streaming
- 05 · Keyboard and STESH voice input
- 06 · Files and destination folder
- 07 · Install an APK from your phone
- 08 · Box monitor and updates
- 09 · If the connection drops
- 10 · Access controls and support
- Air mouse — point your phone
- Move to another box
- 4K wallpaper gallery
01 · Before you begin
- Use a phone running Android 9 or later. Connect the phone and TV box to the same local network. The box can use Ethernet.
- Use Home 3.0.9 for Ugoos SK1 Lite with its factory Launcher3. Supported Magisk firmware has a separate Home 2.1.13-ugoos14 branch. The installer checks the model and chooses the branch. Remote control, streaming and backup were tested on SK1 Lite running the standard branch for this release.
02 · First connection — step by step
- On the TV, open Settings → Companion. Choose “For Android — download (test feature)” or use the download button on this page.
- Install the APK on your phone. If Android requests permission to install from this source, grant it for the browser or file manager you are using.
- Return to Companion on the TV and select “Enable and show QR”. This is a private pairing QR; the APK download QR does not pair your phone.
- Scan the QR with your phone camera and open the link in Companion. To enter the link manually, use “Pair” in the app.
- Tap “Connect”. Wait for the connected remote status, then try the arrows and OK.
- Do not share the pairing QR or link: it grants control of your TV box.
03 · Remote and app launcher
- The default mode is a portrait remote. Arrows move focus; OK confirms. Back and Home control the TV box.
- “All apps” opens a grid on your phone. Tap an icon to launch it on the TV; use the bottom arrows to change pages.
- “Haptic feedback” enables brief button vibrations, subject to your phone settings.
- “Box ⚙” opens quick controls: volume, sleep timer and available TV box settings. The timer requires confirmation; unavailable actions are dimmed.
04 · Full-screen streaming
- Select streaming mode. The picture opens in landscape with its aspect ratio preserved. Tap, hold and drag to control the TV box interface.
- Back goes back on the TV; Home opens the TV home screen; Exit returns to the phone remote. On-screen controls also open the keyboard and microphone.
- Start with Auto codec selection. H.264, H.265 and AV1 require a compatible box encoder and phone decoder. On X11, use the remote and app grid in this release.
- DRM-protected video may appear black. Unavailable streaming does not mean the remote mode is unavailable.
05 · Keyboard and STESH voice input
- Use the keyboard to enter text from your phone. Open the intended input field on the TV first.
- Tap the microphone in Companion, grant the requested phone permission if prompted, and speak. Review the recognized text and confirm sending it to STESH.
- This sends confirmed text, not live microphone audio. STESH must be installed on the box.
06 · Files and destination folder
- On the TV: Settings → Companion → Received files folder. Choose a folder name within Download. The default is Download/TECHNOZON Companion.
- On Android 9, the built-in folder is under Android/data/info.technozon.home/files/Download; uninstalling Home also removes these files. USB selection through a system picker is available only on firmware that provides that picker.
- Tap “Send file” on your phone, select a file and wait for completion. Regular file transfer does not install applications.
07 · Install an APK from your phone
- Choose “Install APK on box” and select a single .apk file up to 512 MiB. ZIP and APKS are not supported.
- Confirm transfer on the phone. Read and confirm the Android installation prompts on the TV. Keep Companion open during transfer.
- The temporary APK is removed after completion or cancellation; interrupted-transfer leftovers older than 24 hours are cleaned during the next transfer.
08 · Box monitor and updates
- “Box monitor” shows available INFO data and charts: load, temperature and other readings exposed by the device. Polling runs while the window is open; a missing reading is not zero.
- In “Updates”, check for a Companion update manually or keep daily checks enabled. Android asks you to confirm installation.
- Home on the box and Companion on the phone update separately. Check both versions if a new feature is unavailable.
09 · If the connection drops
- Check that the phone and box are on the same home network. Guest networks or client isolation can block local connections.
- Make sure the box is awake and Companion access is enabled on the TV. If its IP changes, display a new QR and pair again.
- Return to Companion and tap “Connect” or the connection-loss message. The app also attempts to recover after a temporary disconnection.
- “Stop” ends the session and cancels reconnection. Moving the app to the background pauses the session; returning resumes it unless you pressed Stop.
- If control repeatedly fails, open “Diagnostics · Report”, send the phone and box reports, and keep their report IDs. Tell support the model, versions and actions immediately before the error. Do not share the private pairing QR.
10 · Access controls and support
- “Stop access” on the TV disables Companion access. Enable access on the TV to connect again.
- “Revoke connections” changes the access key and disables access: previously paired phones need to pair again. “Forget” on the phone removes pairing only from that phone.
- Review and send reports through “Diagnostics · Report” on your phone or the diagnostics option in Companion on the TV. Include the report ID when contacting the support chat.
Air mouse — point your phone
Select Air mouse in Companion. Your phone needs a gyroscope and Home needs permission to display the cursor over other apps.
Hold the phone screen up, top edge toward the TV. Aim left/right and tilt up/down. Center cursor resets the pointer; the slider adjusts sensitivity.
Click presses under the cursor; Back and Home control the box. The microphone recognises speech on the phone: confirm the text before sending it to STESH. Leaving this mode stops the gyroscope.
Move to another box
- On the source box, open the third-party app. If it offers settings export, save its export file. In Home, open Settings → Companion → Settings files for transfer. Select the exported file and grant read access.
- Pair your phone with the source box. In Companion, open Move to another box → Back up. Select the standalone APKs and exported settings files you want, then choose a folder on the phone. The backup includes the Home appearance, order and favourites. Wait for the saved message and keep the backup folder private.
- Enable Companion on the destination box and pair the same phone with it. Select Restore and open the newly created TECHNOZON-… folder. Choose what to restore. Apply Home settings replaces the appearance, order and favourites on the destination box.
- Confirm each APK installation on the TV. Restored settings files appear in the box’s Companion received-files folder. Import each file from within its original app. Accounts, activation, device pairings, system apps and split APKs stay on the source box. Bookmarks are matched against channels published by apps on the destination box.
4K wallpaper gallery
Open Settings → Wallpapers → 4K wallpaper gallery. Choose a theme and a thumbnail. Keep one picture or rotate within the theme at intervals from 5 minutes to one day. There are 60 bundled pictures. Download the additional images from the gallery menu for a total of 250.